Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$20.00
Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.
$30.00
Rear Thru Axle conversion kit for Go-Devil Hubs
- Converts QR to 142x12mm thru (axle not included)
$75.00
- 11 Speed Freehub Body for Shimano and Sram Cassettes
- XD Driver for SRAM Cassettes
- 11 Speed Freehub has 28 points of engagement
- XD Driver has 56 points of engagement
- Fits Go-Devil Hubs
$6.99
CNC machined from 6061-T6 aluminum alloy, Box One Schrader Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.
$6.99
CNC machined from 6061-T6 aluminum alloy, Box One™ Presta Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.
Material 6061-T6 Aluminum
Weight 0.25 grams / 0.008 ounces
$5.99
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #16 Clutch Ring
$5.99
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #20 Cone Drive
$9.99 - $23.99
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$13.49
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention
$14.99
Replacement axles for Black Ops MX-1100 hubs.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-576F
- MPN: 370664
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 152mm
- Supplier Part: KT-5V3R
- MPN: 370665
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$14.99 - $31.99
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-M37F
- MPN: 370685
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-M98R
- MPN: 370686
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$21.99
Replacement axle for Black Ops MX-2050 hubs.
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-AB9R
- MPN: 370683
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$69.99 - $73.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair
$31.95
Front disc brake quick release conversion kit from Campagnolo.
- Convert Campagnolo Bora and Shamal disc brake wheels from thru-axle to quick release
- Includes axle, end caps and adjusting sleeve
- Quick release sold separately
$714.00
Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings.
All components are optimized for low friction and prolonged lifetime.
This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018).
In The Box
- 4 x 61803 bearings
- 1 x 61903 bearing
- 1 x 61804 bearing
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
$165.00
Rear Hub Driveshell Conversion with Twin bearings for easy repair or replacement.
- Designed to fit MTN hubs
$344.00
Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap.
Micro Spline Driveshell Instructions
- Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX
- Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.
$9.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
$149.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions
$8.10
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$14.90
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 40mm
$15.28 - $21.69
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.
$16.00
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
$16.30
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 73mm
$16.89 - $45.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$23.99 - $52.79
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$24.40
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$27.20
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$27.20
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
Page 1 of 13
Next page