Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars
$99.99
All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters, we have moved material from 3 low-stress areas to zones of high load. This has greatly minimized twists and contributed to responsiveness. Concurrently we have increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar deflection and the consequences can lead to poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model handlebar is tailored for larger-sized racers and also takes our application of Oversized Technology one step further as it employs a tougher chromium molybdenum steel. This allows for a greater variation of wall thicknesses to combat the higher loads coming from that extra rider weight.
FEATURES
- Oversized™ Technology
- Chromoly Steel - Toughest Handlebar Material In • Lineup
- Massive Clamp Interface for Steering Stiffness
- 13 Butted - Variable Wall Thickness to Reduce Weight
$124.99 - $149.99
Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems.
FEATURES:
- 22.2 Bar Bore
- 3K Weave Carbon Fiber
- Gripper Clamping Area
- Impact-Resistant Clear Coat
- Water Decals
SPECIFICATIONS:
- 3 Inch 4.5 Inch 6 Inch
- Clamp (Ø) 22.2mm
- Material UD Carbon Fiber
- Sweep 6° back, 2° up 6° back, 2° up 7° back, 2° up
- Weight 166 grams / 5.9 ounces 204 grams / 7.2 ounces 288 grams / 10.2 ounces
- Width 21.5 inches 23.6 inches 26 inches
Please note, the maximum recommended rider weight for these bars is 100 pounds.
$20.99
- Traditional BMX handlebar design
- For single-bolt BMX stems
- Chrome-plated
- Clamp Size: 1-inch
- Width: 22.5-inch
- Rise: 6-inch
- Material: Steel
$22.99
- CW style
- Chrome-plated
- Clamp Size: 7/8-inch
- Width: 26-inch
- Rise 8-inch
- Type: BMX
- Material: Steel
$26.99
- Clamp Size: 7/8-inch
- Width: 27.5-inch
- Rise/Reach: 8.25-inch
- Type: BMX
- Material: Steel
$47.99
- Low-rise Black Ops chromoly BMX handle bar
- 30-inch width with a 6-inch rise - Wide and low
- Clamp Size: 22.2mm
- Material: Chromoly
$51.99
- Oversized BMX style cruiser bars perfect for wheelie bikes
- Durable chromoly construction with TIG-welded crossbar
- 22.2mm clamp and grip area
- Width: 31.5-inch
- Rise/Reach: 7-inch
- Upsweep: 1°
- Back Sweep: 10°
- Material: Chromoly
$59.99
- Butted full chromoly construction
- Lightweight design
- Clamp Size: 7/8-inch
- Width: 27.1-inch
- Rise/Reach: 8.25-inch
- Upsweep/Drop: 3°
- Material: Chromoly
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise.
$90.00
Intended for dirt jumping, and your trail or DH bike if you need the extra rise. The FU50 is the exact same platform as the FU40, but with 50mm of rise!
$94.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars
$99.00
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees
$200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum
$19.99
A great bar for your fixie, single speed, or cruiser.
- Aluminum Arc bar with wide sweep
- May come in OEM packaging
- Back Sweep (deg): 27
- Material: Aluminum
- Rise: 0mm
$19.99
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position.
- AL-6061 aluminum alloy
- ISO4210 safety tested for city/trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 50-degree sweep
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep
$19.99
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style.
- Material: Aluminum
- Lever Compatability: Mountain 22.2mm
$21.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- Zero-Rise
$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike.
- Designed for City-Trekking use
- Not intended for mountain biking
- Bar Clamp Diameter (mm): 25.4
- Color: Black
- Lever Compatibility: Mountain 22.2
- Weight: 479g
- Width: 585mm
$34.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
$39.99
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing.
- Made from 6061 Aluminum
- Single-groove cable routing
- Accessory Mount Diameter (mm): 26.0
- Bar Clamp Diameter (mm): 26.0
- Bar Drop (mm): 128
- Bar Reach (mm): 80
- Bar Top Style: Round
- Clip-on Compatible: No
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 340g (40cm)
- Width Measurement: Center
$47.99
These are 31.8mm flat top road drop bars with very shallow reach.
- Double-butted and tapered 6061-T6 aluminum bars
- 120mm wide center section with 31.8mm diameter
- Flat top bar with cable grooves
- Accessory Mount Diameter (mm): 31.8
- Bar Clamp Diameter (mm): 31.8
- Bar Drop (mm): 125
- Bar Reach (mm): 70
- Bar Top Style: Flat
- Clip-on Compatible: Yes
- Color: Black
- Defined Color: Black
- Drop Bend Style: Compact
- Material: Aluminum
- Weight: 266g
- Width: 38cm
- Width Measurement: Center
$190.00
The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders.
- Includes decal sheet to color match with ENVE wheel decals
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$190.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm
$400.00
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility.
Who It's For
Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration.
Why We Made It
Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
$400.00
The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort.
- Application: Road Race, All-Road, Gravel, Cyclocross
- Sizes: 38cm, 40cm, 42cm, 44cm, 46cm
- Weights: 243g, 245g, 248g, 262g, 280g
- Full Integrated Internal or External Routing
- Lifetime Incident Protection and 5 Year Factory Warranty
Page 1 of 10
Next page